Leicester · East Midlands
Dry Rot Treatment in Leicester
In Leicester, dry rot always starts with a moisture problem, and our specialists fix the source first across the East Midlands.
Covering Leicester and nearby
Leicester is in the Leicester council area in the East Midlands. Jobs here are mostly in the LE3, LE2, LE4, LE5, LE1 and LE7 postcode areas. The same team covers Wigston, Leicester Forest East, Birstall, Groby and Thurmaston too.
What to expect in Leicester
Former mining and textile towns across the East Midlands have a lot of late-Victorian and early twentieth-century housing alongside modern development. Victorian homes in Leicester often have timber bonding and lintels built into brick walls, where dry rot can travel.
Terraced homes in Leicester often have timber built into party walls, where dry rot can travel unseen. Basement flats in Leicester with poor ventilation and leaks are at higher risk of dry rot in floor timbers.
Dry Rot Treatment services in Leicester
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Dry Rot Treatment prices in Leicester
- Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
Prices are a guide. Your quote for Leicester is a fixed price based on the details you give us. Full price guide.
Dry Rot Treatment questions from Leicester
What causes dry rot in Leicester homes?
Dry rot in Leicester homes is caused by damp timber, usually from leaking gutters, roofs or plumbing, blocked air bricks or timber in contact with damp walls. Fixing the moisture source is the key to stopping it.
Can you help buyers in Leicester with dry rot reports?
Yes. If your survey on a Leicester property mentions dry rot, a specialist can confirm it and provide a report and fixed price. This helps you negotiate with the seller or lender before completing.
How quickly can a specialist visit my Leicester property?
Specialists can usually inspect properties in Leicester within a few days to a week. If you have found active fungus or structural damage, mention it on the quote form so the visit can be prioritised.
Do your timber specialists travel to villages outside Leicester?
Yes. Timber specialists regularly work outside Leicester, in places like Oadby and Syston. Rural cottages and barn conversions with historic timbers are treated with care for traditional construction.
Can dry rot spread through walls?
Yes, dry rot can spread strands through and across brick, stone and plaster to reach timber some distance from the original outbreak. The strands do not feed on masonry but use it as a route. This is why specialists open up walls to trace how far it has travelled.
What is dry rot?
Dry rot is decay caused by the fungus Serpula lacrymans, which attacks damp timber in buildings. It can spread strands across masonry to reach new wood, causing timber to shrink, crack into cubes and crumble. Despite its name, it needs moisture to grow, usually timber above about 20% moisture content.
Helpful guides
How to Identify Dry Rot: Signs, Simple Tests and What to Do
Dry rot shows as brown, crumbly timber with deep cube-shaped cracking, white cotton-wool or grey sheet-like growth, thick grey strands that…
Read the guide →Dry Rot in Listed and Period Buildings: A Conservation Approach
In listed and period buildings, dry rot is best treated by fixing the moisture source, drying the structure and removing only decayed…
Read the guide →Get a free dry rot treatment quote in Leicester
Tell us what you need and we'll come back with a clear price.
Request a quote