Dry Rot Treatment

Dry Rot Treatment

Structural Timber Replacement

Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.

Free Dry Rot Treatment quote

No obligation. We only use your details to reply about this job.

Structural Timber Replacement — Dry Rot Treatment

What's involved

Dry rot often attacks the timbers holding a building together: joist ends, wall plates, bressummers, lintels and roof timbers. Replacement uses pre-treated softwood or, where appropriate, hardwood, sized to match or improve on the original. Joist ends are isolated from masonry with a damp proof membrane or carried on galvanised hangers. Lintels may be replaced with concrete or steel where decay was severe. Wall plates are bedded on a DPC strip. Where structural members are affected, the specialist may involve a structural engineer and, if alterations go beyond like-for-like repair, building control. Floorboards and skirtings are then reinstated, primed on all faces. Timber replacement typically takes several days per room, depending on how much structure is affected.

How we handle it

  1. Report what you see

    Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.

  2. Specialist survey

    A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.

  3. Fixed price

    You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.

  4. Treatment works

    The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.

  5. Reinstate and monitor

    Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.

Price guide

Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.

  • Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
  • Dry rot survey and report: £200–£450. Specialist inspection to confirm dry rot, map its extent and identify the moisture source.
  • Small localised outbreak: £1,000–£2,500. Limited area such as a skirting and a few floorboards, with treatment and reinstatement.

Questions about structural timber replacement

Do I need to cut out a metre of timber beyond dry rot?

Older guidance recommended cutting out timber a metre beyond the last visible sign of dry rot. Modern practice usually uses a smaller margin, around 300 to 500 mm, once the moisture source is fixed and the building is drying. This reduces unnecessary damage, especially in historic buildings.

Get a free dry rot treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote