Dry Rot Treatment
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.

What's involved
Dry rot cannot survive once timber dries below around 20 per cent moisture content. That makes fixing the water source the first and most important step. Common causes include leaking gutters and downpipes, failed roof flashings, leaking pipes under floors, blocked or covered air bricks, raised ground levels outside and timbers built into damp walls. Specialists repair or coordinate the right trade for each defect. They then speed up drying with ventilation, dehumidifiers and, where suitable, by removing wet plaster or debris. Air bricks are cleared or added to create cross ventilation under suspended floors. Moisture readings are taken over the following weeks to confirm the structure is drying. Without this step, any amount of cutting and chemical treatment is likely to fail.
How we handle it
Report what you see
Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.
Specialist survey
A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.
Fixed price
You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.
Treatment works
The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.
Reinstate and monitor
Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.
Price guide
Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
- Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.
Questions about moisture source repairs and drying
Can I treat dry rot myself?
DIY treatment of dry rot is not recommended. The fungus can spread out of sight, and missing part of an outbreak or the moisture source often leads to regrowth. Structural timbers may need engineering input. A specialist survey and professional treatment give the best chance of a lasting cure.
Is dry rot covered by home insurance?
Dry rot is usually excluded from home insurance because it develops gradually from damp. However, if it results from a sudden insured event, such as an escape of water, some insurers may consider a claim. Check your policy and speak to your insurer early.
Will dry rot affect selling my house?
Dry rot found during a survey can delay or affect a sale, as buyers and lenders want it treated. Having a specialist report, completed treatment and a written guarantee helps reassure buyers. Untreated dry rot may lead to a lower offer or a buyer withdrawing.
Other services
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Moisture Source Repairs and Drying near you
Get a free dry rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote