Dry Rot Treatment FAQs
Straight answers to the questions we're asked most.
What is dry rot?
Dry rot is decay caused by the fungus Serpula lacrymans, which attacks damp timber in buildings. It can spread strands across masonry to reach new wood, causing timber to shrink, crack into cubes and crumble. Despite its name, it needs moisture to grow, usually timber above about 20% moisture content.
How do I identify dry rot?
Signs of dry rot include timber that has shrunk and cracked into cubes, white cotton wool-like growth, grey strands on masonry, a musty mushroom smell and a flat, rusty red fruiting body that sheds red-brown spore dust. A specialist should confirm it, because wet rot can look similar.
What is the difference between dry rot and wet rot?
Dry rot is caused by one fungus, Serpula lacrymans, and can spread through masonry to attack timber away from the original damp area. Wet rot is caused by several fungi and stays confined to wet timber. Dry rot usually needs more extensive treatment, while wet rot stops once the timber dries.
How much does dry rot treatment cost?
Dry rot treatment typically costs £1,000–£2,500 for a small localised outbreak, £3,000–£7,000 for a single room with floor joists affected and £7,000–£20,000 or more for extensive structural outbreaks. A survey usually costs £200–£450. Costs depend on the extent of decay and the timbers involved.
Is dry rot dangerous?
Dry rot is a serious structural risk because it can weaken joists, lintels and roof timbers. It is not generally considered a significant health hazard for most people, although the spores and musty air may irritate those with allergies or asthma. Structural damage is the main concern.
Can dry rot spread through walls?
Yes, dry rot can spread strands through and across brick, stone and plaster to reach timber some distance from the original outbreak. The strands do not feed on masonry but use it as a route. This is why specialists open up walls to trace how far it has travelled.
How long does dry rot treatment take?
Small outbreaks can be treated in two to four days. A room with floor joists affected may take one to two weeks, and extensive outbreaks across several rooms can take longer. Drying the building and reinstating plaster add time after the main treatment.
Does dry rot come back after treatment?
Dry rot should not come back if the moisture source is fixed and the building stays dry. Regrowth usually happens when leaks return, ventilation is blocked again or the original cause was not found. Keep gutters, plumbing and air bricks in good order after treatment.
Do I need to cut out a metre of timber beyond dry rot?
Older guidance recommended cutting out timber a metre beyond the last visible sign of dry rot. Modern practice usually uses a smaller margin, around 300 to 500 mm, once the moisture source is fixed and the building is drying. This reduces unnecessary damage, especially in historic buildings.
Will dry rot affect selling my house?
Dry rot found during a survey can delay or affect a sale, as buyers and lenders want it treated. Having a specialist report, completed treatment and a written guarantee helps reassure buyers. Untreated dry rot may lead to a lower offer or a buyer withdrawing.
Is dry rot covered by home insurance?
Dry rot is usually excluded from home insurance because it develops gradually from damp. However, if it results from a sudden insured event, such as an escape of water, some insurers may consider a claim. Check your policy and speak to your insurer early.
Can I treat dry rot myself?
DIY treatment of dry rot is not recommended. The fungus can spread out of sight, and missing part of an outbreak or the moisture source often leads to regrowth. Structural timbers may need engineering input. A specialist survey and professional treatment give the best chance of a lasting cure.
Get a free dry rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote