Dry Rot Treatment

Dry Rot Treatment

Replastering and Reinstatement

Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.

Free Dry Rot Treatment quote

No obligation. We only use your details to reply about this job.

Replastering and Reinstatement — Dry Rot Treatment

What's involved

After treatment, the building needs putting back together. Walls opened up to follow strands are replastered once masonry has dried enough, often with lime plaster in older homes to keep walls breathable, or with a suitable modern system in newer properties. Plasterboard on battens can be used to speed up reinstatement where walls are still drying, as long as there is a ventilated gap behind. New skirtings, architraves and floorboards are fitted, then the room is ready for decoration. It is wise to leave inspection points, such as a removable floor panel, so you can check the area in future. Keep monitoring moisture for a few months. If anything damp reappears near the treated area, contact the specialist straight away.

How we handle it

  1. Report what you see

    Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.

  2. Specialist survey

    A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.

  3. Fixed price

    You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.

  4. Treatment works

    The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.

  5. Reinstate and monitor

    Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.

Price guide

Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.

  • Small localised outbreak: £1,000–£2,500. Limited area such as a skirting and a few floorboards, with treatment and reinstatement.
  • Single room with floor joists: £3,000–£7,000. Opening up, removing decayed joists and boards, treatment and replacement in one room.
  • Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.

Questions about replastering and reinstatement

Does dry rot come back after treatment?

Dry rot should not come back if the moisture source is fixed and the building stays dry. Regrowth usually happens when leaks return, ventilation is blocked again or the original cause was not found. Keep gutters, plumbing and air bricks in good order after treatment.

What is dry rot?

Dry rot is decay caused by the fungus Serpula lacrymans, which attacks damp timber in buildings. It can spread strands across masonry to reach new wood, causing timber to shrink, crack into cubes and crumble. Despite its name, it needs moisture to grow, usually timber above about 20% moisture content.

Can dry rot spread through walls?

Yes, dry rot can spread strands through and across brick, stone and plaster to reach timber some distance from the original outbreak. The strands do not feed on masonry but use it as a route. This is why specialists open up walls to trace how far it has travelled.

Get a free dry rot treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote