Dry Rot Treatment
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.

What's involved
Dry rot has distinctive signs. Affected timber shrinks, darkens and breaks into cuboidal cracks, often with a dry, crumbly feel. Fluffy white mycelium, like cotton wool, grows in damp, still conditions, sometimes with patches of lilac or yellow. Grey strands, up to pencil thickness, spread across masonry. The fruiting body is a flat, pancake-like growth with a rusty red centre, which sheds fine red-brown spores. The surveyor looks for all of these, uses a moisture meter and probe, and lifts boards or removes small areas of plaster to follow strands. They also trace the water source, such as a leaking gutter, plumbing or blocked air bricks. Expect two to four hours on site, plus a written report with photos and a plan.
How we handle it
Report what you see
Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.
Specialist survey
A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.
Fixed price
You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.
Treatment works
The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.
Reinstate and monitor
Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.
Price guide
Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.
- Dry rot survey and report: £200–£450. Specialist inspection to confirm dry rot, map its extent and identify the moisture source.
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
Questions about dry rot survey and identification
How long does dry rot treatment take?
Small outbreaks can be treated in two to four days. A room with floor joists affected may take one to two weeks, and extensive outbreaks across several rooms can take longer. Drying the building and reinstating plaster add time after the main treatment.
Can dry rot spread through walls?
Yes, dry rot can spread strands through and across brick, stone and plaster to reach timber some distance from the original outbreak. The strands do not feed on masonry but use it as a route. This is why specialists open up walls to trace how far it has travelled.
Is dry rot dangerous?
Dry rot is a serious structural risk because it can weaken joists, lintels and roof timbers. It is not generally considered a significant health hazard for most people, although the spores and musty air may irritate those with allergies or asthma. Structural damage is the main concern.
Other services
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Dry Rot Survey and Identification near you
Get a free dry rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote