Dry Rot Treatment
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.

What's involved
To deal with an outbreak, the specialist needs to see it. Floorboards are lifted, skirtings and architraves removed and plaster taken off walls where strands run behind. All decayed timber is cut out, usually back to sound wood with a margin beyond the last visible sign of fungus. Traditional practice cut a full metre beyond; modern guidance favours a smaller, proportionate margin of about 300 to 500 millimetres once the moisture source is fixed, reducing damage to historic fabric. Mycelium and strands are cleaned off masonry with wire brushes. Waste timber and debris are bagged and removed promptly to avoid spreading spores through the house. Opening up can be dusty and disruptive, so clear the affected rooms and expect the work to take one to three days.
How we handle it
Report what you see
Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.
Specialist survey
A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.
Fixed price
You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.
Treatment works
The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.
Reinstate and monitor
Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.
Price guide
Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.
- Dry rot survey and report: £200–£450. Specialist inspection to confirm dry rot, map its extent and identify the moisture source.
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
Questions about opening up and removal of decayed timber
Do I need to cut out a metre of timber beyond dry rot?
Older guidance recommended cutting out timber a metre beyond the last visible sign of dry rot. Modern practice usually uses a smaller margin, around 300 to 500 mm, once the moisture source is fixed and the building is drying. This reduces unnecessary damage, especially in historic buildings.
Other services
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Opening Up and Removal of Decayed Timber near you
Get a free dry rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote