Nationwide · England, Scotland & Wales
Dry Rot Treatment across the UK
Dry rot found, stopped at the source and the structure put right.
In short
Dry Rot Treatment is the identification and eradication of Serpula lacrymans, a wood-destroying fungus that attacks damp timber in buildings and can spread through masonry. Treatment means finding and fixing the moisture source, removing decayed timber and affected materials, treating surrounding timber and masonry with fungicide where needed, and replacing structural timber with pre-treated wood.
- Free, no-obligation quotes
- Vetted, insured specialists
- Clear fixed prices
Fixed, clear prices
One all-in price before any work starts.
Vetted specialists
Insured teams who do this work every week.
Responsible disposal
Licensed waste routes and proper paperwork.
500 areas covered
Pages for every town we serve.
Dry rot is the most serious form of timber decay in UK buildings. The fungus, Serpula lacrymans, attacks softwood with a moisture content above about 20 per cent and can send strands across brick, stone and plaster to reach new timber. Left alone it can destroy floor joists, skirtings, lintels and roof timbers. Despite its reputation, it always starts with a moisture problem, and drying the building out is the single most important part of any cure.
We arrange dry rot work through vetted, insured timber specialists who start with a thorough survey to confirm the fungus and map how far it has spread. They then fix the leak or damp source, open up and remove decayed timber, treat surrounding areas proportionately and replace structural members. Modern practice avoids unnecessary destruction, especially in period homes. Tell us what you have found through the quote form, with photos if possible, and we will arrange a specialist and a clear price.
Our Dry Rot Treatment services
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Find out more →Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Find out more →Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Find out more →Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Find out more →Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Find out more →Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Find out more →How it works
Report what you see
Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.
Specialist survey
A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.
Fixed price
You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.
Treatment works
The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.
Reinstate and monitor
Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.
Dry Rot Treatment prices
Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.
| Job | Guide price | Notes |
|---|---|---|
| Dry rot survey and report | £200–£450 | Specialist inspection to confirm dry rot, map its extent and identify the moisture source. |
| Small localised outbreak | £1,000–£2,500 | Limited area such as a skirting and a few floorboards, with treatment and reinstatement. |
| Single room with floor joists | £3,000–£7,000 | Opening up, removing decayed joists and boards, treatment and replacement in one room. |
| Multi-room or structural outbreak | £7,000–£20,000+ | Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved. |
| Joist end replacement | from £150 per joist | Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry. |
| Replastering after treatment | £60–£130 per m² | Lime or modern plaster once walls have dried, depending on the system used. |
Who we work for
Homeowners
Owners who discover fungus, strands or crumbling timber need fast, expert advice and a treatment plan that stops the rot without unnecessary destruction.
Homebuyers
Buyers whose survey mentions dry rot need a specialist report and fixed price to understand the risk and negotiate before completing a purchase.
Landlords and managing agents
Landlords and agents need dry rot dealt with properly to protect structures, tenants and building insurance, often in flats with shared parts.
Owners of period properties
Victorian, Georgian and older homes have more timber in walls and floors, and need specialists who balance eradication with protecting historic fabric.
Property developers
Developers renovating older buildings often find dry rot when opening up and need quick, reliable treatment to keep projects on schedule.
Rules and standards that apply
- The Control of Substances Hazardous to Health Regulations 2002 require operatives using fungicides and timber preservatives to assess and control exposure, following product safety data sheets.
- Timber preservatives and fungicides are biocidal products and must be authorised for use in Great Britain under the biocides regime administered by the Health and Safety Executive.
- Listed building consent is usually needed for dry rot work that removes historic fabric or alters a listed building's character, under the Planning (Listed Buildings and Conservation Areas) Act 1990.
- In Scotland, the Tenements (Scotland) Act 2004 sets rules for shared repairs in tenements, which can apply when dry rot affects common parts such as roofs and stairwells.
How to choose the right dry rot treatment company
- Choose a specialist who identifies and fixes the moisture source rather than relying only on chemicals.
- Ask whether they hold a recognised qualification, such as the PCA's CSRT or a timber decay specialism.
- Check they follow proportionate modern practice and will not remove more historic fabric than necessary.
- Make sure the price covers opening up, removal, treatment, replacement and reinstatement, not just spraying.
- Ask about structural engineer involvement where joists, lintels or roof timbers are affected.
- Check any guarantee is in writing and ideally insurance-backed, and understand what it covers.
Frequently asked questions
What is dry rot?
Dry rot is decay caused by the fungus Serpula lacrymans, which attacks damp timber in buildings. It can spread strands across masonry to reach new wood, causing timber to shrink, crack into cubes and crumble. Despite its name, it needs moisture to grow, usually timber above about 20% moisture content.
How do I identify dry rot?
Signs of dry rot include timber that has shrunk and cracked into cubes, white cotton wool-like growth, grey strands on masonry, a musty mushroom smell and a flat, rusty red fruiting body that sheds red-brown spore dust. A specialist should confirm it, because wet rot can look similar.
What is the difference between dry rot and wet rot?
Dry rot is caused by one fungus, Serpula lacrymans, and can spread through masonry to attack timber away from the original damp area. Wet rot is caused by several fungi and stays confined to wet timber. Dry rot usually needs more extensive treatment, while wet rot stops once the timber dries.
How much does dry rot treatment cost?
Dry rot treatment typically costs £1,000–£2,500 for a small localised outbreak, £3,000–£7,000 for a single room with floor joists affected and £7,000–£20,000 or more for extensive structural outbreaks. A survey usually costs £200–£450. Costs depend on the extent of decay and the timbers involved.
Is dry rot dangerous?
Dry rot is a serious structural risk because it can weaken joists, lintels and roof timbers. It is not generally considered a significant health hazard for most people, although the spores and musty air may irritate those with allergies or asthma. Structural damage is the main concern.
Can dry rot spread through walls?
Yes, dry rot can spread strands through and across brick, stone and plaster to reach timber some distance from the original outbreak. The strands do not feed on masonry but use it as a route. This is why specialists open up walls to trace how far it has travelled.
How long does dry rot treatment take?
Small outbreaks can be treated in two to four days. A room with floor joists affected may take one to two weeks, and extensive outbreaks across several rooms can take longer. Drying the building and reinstating plaster add time after the main treatment.
Does dry rot come back after treatment?
Dry rot should not come back if the moisture source is fixed and the building stays dry. Regrowth usually happens when leaks return, ventilation is blocked again or the original cause was not found. Keep gutters, plumbing and air bricks in good order after treatment.
Dry Rot Treatment guides
How Much Does Dry Rot Treatment Cost in the UK?
Dry rot treatment in the UK costs £1,000–£2,500 for a small localised outbreak, £3,000–£7,000 for a single room with floor joists and…
Read the guide →How to Identify Dry Rot: Signs, Simple Tests and What to Do
Dry rot shows as brown, crumbly timber with deep cube-shaped cracking, white cotton-wool or grey sheet-like growth, thick grey strands that…
Read the guide →Dry Rot vs Wet Rot: Differences, Signs and Treatment
Dry rot, caused by Serpula lacrymans, can spread beyond the original wet area and across masonry to reach new timber, so it needs wider…
Read the guide →What Happens During Dry Rot Treatment? Stage by Stage
Dry rot treatment follows clear stages: a survey to confirm the fungus and map its extent, fixing the moisture source, opening up floors…
Read the guide →Dry Rot in Listed and Period Buildings: A Conservation Approach
In listed and period buildings, dry rot is best treated by fixing the moisture source, drying the structure and removing only decayed…
Read the guide →Areas we cover
We cover England, Scotland and Wales, with dedicated pages for 500 towns and cities. If your town isn't listed, ask anyway — we probably cover it.
Get a free dry rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote