Dry Rot Treatment

Dry Rot Treatment

Fungicidal Treatment of Timber and Masonry

Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.

Free Dry Rot Treatment quote

No obligation. We only use your details to reply about this job.

Fungicidal Treatment of Timber and Masonry — Dry Rot Treatment

What's involved

Once decayed timber is out and the moisture source fixed, surrounding sound timber is treated to protect it while the building dries. Most specialists use boron-based preservatives, applied by spray, brush or as a paste, which penetrate timber and stay active as long as the wood remains dry. Masonry that strands have crossed can be treated with a fungicidal solution or by irrigation through drilled holes, creating a zone that discourages regrowth, though this is used less widely than in the past. Treatment is targeted to the areas at risk rather than blanket spraying the whole house. Products should be approved for use, and operatives follow safety data sheets and COSHH assessments. Ventilate rooms and keep pets and children out until surfaces are dry.

How we handle it

  1. Report what you see

    Use the quote form to describe the signs, such as fungus, strands, red dust or crumbling timber, and share photos and the property age if possible.

  2. Specialist survey

    A timber specialist confirms dry rot, maps its extent, finds the moisture source and explains the treatment plan in a written report.

  3. Fixed price

    You receive one price covering source repairs, opening up, timber removal, treatment, replacement and reinstatement agreed in the plan.

  4. Treatment works

    The team fixes the water source, removes decayed timber, treats surrounding areas, replaces structural timber and isolates it from damp masonry.

  5. Reinstate and monitor

    Walls and floors are put back once dry. You receive details of the work, any guarantee and advice on checking the area in future.

Price guide

Dry rot treatment is priced after a survey, because the cost depends on how far the fungus has spread and which timbers are affected. Small localised outbreaks cost far less than cases involving joists, lintels or several rooms. Fixing the moisture source, opening up, timber replacement and reinstatement are all part of the total. Treat the figures below as 2026 guide prices.

  • Small localised outbreak: £1,000–£2,500. Limited area such as a skirting and a few floorboards, with treatment and reinstatement.
  • Single room with floor joists: £3,000–£7,000. Opening up, removing decayed joists and boards, treatment and replacement in one room.
  • Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.

Questions about fungicidal treatment of timber and masonry

How much does dry rot treatment cost?

Dry rot treatment typically costs £1,000–£2,500 for a small localised outbreak, £3,000–£7,000 for a single room with floor joists affected and £7,000–£20,000 or more for extensive structural outbreaks. A survey usually costs £200–£450. Costs depend on the extent of decay and the timbers involved.

How long does dry rot treatment take?

Small outbreaks can be treated in two to four days. A room with floor joists affected may take one to two weeks, and extensive outbreaks across several rooms can take longer. Drying the building and reinstating plaster add time after the main treatment.

Does dry rot come back after treatment?

Dry rot should not come back if the moisture source is fixed and the building stays dry. Regrowth usually happens when leaks return, ventilation is blocked again or the original cause was not found. Keep gutters, plumbing and air bricks in good order after treatment.

Get a free dry rot treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote