Somerset · South West
Dry Rot Treatment in Bridgwater
Landlords and agents throughout Somerset, including Bridgwater, rely on us for documented dry rot treatment.
Bridgwater and the surrounding area
Bridgwater falls within Somerset, South West. That includes the TA6 and TA5 postcode districts. The same team covers North Petherton, Cannington, Woolavington, Wembdon and Westonzoyland too.
Working in Bridgwater
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Post-2000 extensions in Bridgwater can block ventilation to older floors, creating conditions for dry rot.
Suburban homes in Bridgwater with suspended timber floors are at risk if air bricks are blocked by patios or extensions. Garages and porches built against older Bridgwater homes can block ventilation and trap moisture.
Our services in Bridgwater
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Guide prices for Bridgwater
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
- Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.
Prices are a guide. Your quote for Bridgwater is a fixed price based on the details you give us. Full price guide.
Dry Rot Treatment questions from Bridgwater
Will dry rot treatment disrupt my Bridgwater home?
Opening up floors and walls is disruptive, so affected rooms in your Bridgwater home will need clearing. Specialists contain dust, remove waste promptly and work room by room where possible to limit disruption.
Do you treat dry rot in Bridgwater?
Yes. We arrange dry rot surveys and treatment across Bridgwater and nearby areas, including Burnham-on-Sea and Weston-super-Mare. A specialist confirms the fungus, finds the moisture source and provides a clear, fixed price for treatment and repairs.
Can you treat dry rot in a listed building in Bridgwater?
Yes, though you may first need listed building consent from Somerset. Specialists use conservation-led methods that remove only what is necessary and focus on drying the building to protect historic fabric.
Do you treat dry rot in flats in Bridgwater?
Yes. Dry rot in Bridgwater flats may involve shared parts, so specialists may need access to neighbouring properties or common areas. Repairs to shared parts may need agreement from other owners or the freeholder.
How do I identify dry rot?
Signs of dry rot include timber that has shrunk and cracked into cubes, white cotton wool-like growth, grey strands on masonry, a musty mushroom smell and a flat, rusty red fruiting body that sheds red-brown spore dust. A specialist should confirm it, because wet rot can look similar.
What is the difference between dry rot and wet rot?
Dry rot is caused by one fungus, Serpula lacrymans, and can spread through masonry to attack timber away from the original damp area. Wet rot is caused by several fungi and stays confined to wet timber. Dry rot usually needs more extensive treatment, while wet rot stops once the timber dries.
Helpful guides
Dry Rot vs Wet Rot: Differences, Signs and Treatment
Dry rot, caused by Serpula lacrymans, can spread beyond the original wet area and across masonry to reach new timber, so it needs wider…
Read the guide →How to Identify Dry Rot: Signs, Simple Tests and What to Do
Dry rot shows as brown, crumbly timber with deep cube-shaped cracking, white cotton-wool or grey sheet-like growth, thick grey strands that…
Read the guide →Get a free dry rot treatment quote in Bridgwater
Tell us what you need and we'll come back with a clear price.
Request a quote