Gloucestershire · South West
Dry Rot Treatment in Cheltenham
From floor joists to roof timbers, dry rot in Cheltenham properties is removed and replaced with treated timber.
Where we work around Cheltenham
We cover all of Cheltenham and the wider Gloucestershire area. Jobs here are mostly in the GL51, GL50, GL52, GL53 and GL54 postcode areas. Nearby places we also cover include Bishop's Cleeve, Churchdown, Shurdington and Stoke Orchard.
Dry Rot Treatment in Cheltenham: local know-how
Suburban homes in Cheltenham with suspended timber floors are at risk if air bricks are blocked by patios or extensions. Garages and porches built against older Cheltenham homes can block ventilation and trap moisture.
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Victorian homes in Cheltenham often have timber bonding and lintels built into brick walls, where dry rot can travel.
What we can do in Cheltenham
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Typical costs in Cheltenham
- Dry rot survey and report: £200–£450. Specialist inspection to confirm dry rot, map its extent and identify the moisture source.
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
Prices are a guide. Your quote for Cheltenham is a fixed price based on the details you give us. Full price guide.
Dry Rot Treatment questions from Cheltenham
Will dry rot treatment disrupt my Cheltenham home?
Opening up floors and walls is disruptive, so affected rooms in your Cheltenham home will need clearing. Specialists contain dust, remove waste promptly and work room by room where possible to limit disruption.
Do you treat dry rot in Cheltenham?
Yes. We arrange dry rot surveys and treatment across Cheltenham and nearby areas, including Gloucester and Cirencester. A specialist confirms the fungus, finds the moisture source and provides a clear, fixed price for treatment and repairs.
Can you treat dry rot in a listed building in Cheltenham?
Yes, though you may first need listed building consent from Gloucestershire. Specialists use conservation-led methods that remove only what is necessary and focus on drying the building to protect historic fabric.
Do you treat dry rot in flats in Cheltenham?
Yes. Dry rot in Cheltenham flats may involve shared parts, so specialists may need access to neighbouring properties or common areas. Repairs to shared parts may need agreement from other owners or the freeholder.
How much does dry rot treatment cost?
Dry rot treatment typically costs £1,000–£2,500 for a small localised outbreak, £3,000–£7,000 for a single room with floor joists affected and £7,000–£20,000 or more for extensive structural outbreaks. A survey usually costs £200–£450. Costs depend on the extent of decay and the timbers involved.
Do I need to cut out a metre of timber beyond dry rot?
Older guidance recommended cutting out timber a metre beyond the last visible sign of dry rot. Modern practice usually uses a smaller margin, around 300 to 500 mm, once the moisture source is fixed and the building is drying. This reduces unnecessary damage, especially in historic buildings.
Helpful guides
Dry Rot in Listed and Period Buildings: A Conservation Approach
In listed and period buildings, dry rot is best treated by fixing the moisture source, drying the structure and removing only decayed…
Read the guide →Dry Rot vs Wet Rot: Differences, Signs and Treatment
Dry rot, caused by Serpula lacrymans, can spread beyond the original wet area and across masonry to reach new timber, so it needs wider…
Read the guide →Get a free dry rot treatment quote in Cheltenham
Tell us what you need and we'll come back with a clear price.
Request a quote