North Ayrshire · Scotland
Dry Rot Treatment in Irvine
From floor joists to roof timbers, dry rot in Irvine properties is removed and replaced with treated timber.
Covering Irvine and nearby
Irvine is in the North Ayrshire council area in Scotland. Jobs here are mostly in the KA11 and KA12 postcode areas. Nearby places we also cover include Stevenston, Perceton and Springside.
What to expect in Irvine
Tenement closes, shared repairs and a wetter climate are typical considerations for work in Scotland's towns and cities. Modern homes around Irvine with timber frames need leaks fixed quickly to prevent decay. Sandstone buildings in Irvine often have timber safe lintels and lath linings where dry rot can spread behind plaster.
Garages and porches built against older Irvine homes can block ventilation and trap moisture. Bay windows in Irvine suburbs often have timber bressummers that can decay if bay roofs leak.
Dry Rot Treatment services in Irvine
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Dry Rot Treatment prices in Irvine
- Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.
- Single room with floor joists: £3,000–£7,000. Opening up, removing decayed joists and boards, treatment and replacement in one room.
- Small localised outbreak: £1,000–£2,500. Limited area such as a skirting and a few floorboards, with treatment and reinstatement.
Prices are a guide. Your quote for Irvine is a fixed price based on the details you give us. Full price guide.
Dry Rot Treatment questions from Irvine
What causes dry rot in Irvine homes?
Dry rot in Irvine homes is caused by damp timber, usually from leaking gutters, roofs or plumbing, blocked air bricks or timber in contact with damp walls. Fixing the moisture source is the key to stopping it.
Will dry rot treatment disrupt my Irvine home?
Opening up floors and walls is disruptive, so affected rooms in your Irvine home will need clearing. Specialists contain dust, remove waste promptly and work room by room where possible to limit disruption.
Do you treat dry rot in flats in Irvine?
Yes. Dry rot in Irvine flats may involve shared parts, so specialists may need access to neighbouring properties or common areas. Repairs to shared parts may need agreement from other owners or the freeholder.
Can you help buyers in Irvine with dry rot reports?
Yes. If your survey on a Irvine property mentions dry rot, a specialist can confirm it and provide a report and fixed price. This helps you negotiate with the seller or lender before completing.
Do I need to cut out a metre of timber beyond dry rot?
Older guidance recommended cutting out timber a metre beyond the last visible sign of dry rot. Modern practice usually uses a smaller margin, around 300 to 500 mm, once the moisture source is fixed and the building is drying. This reduces unnecessary damage, especially in historic buildings.
How do I identify dry rot?
Signs of dry rot include timber that has shrunk and cracked into cubes, white cotton wool-like growth, grey strands on masonry, a musty mushroom smell and a flat, rusty red fruiting body that sheds red-brown spore dust. A specialist should confirm it, because wet rot can look similar.
Helpful guides
What Happens During Dry Rot Treatment? Stage by Stage
Dry rot treatment follows clear stages: a survey to confirm the fungus and map its extent, fixing the moisture source, opening up floors…
Read the guide →How to Identify Dry Rot: Signs, Simple Tests and What to Do
Dry rot shows as brown, crumbly timber with deep cube-shaped cracking, white cotton-wool or grey sheet-like growth, thick grey strands that…
Read the guide →Get a free dry rot treatment quote in Irvine
Tell us what you need and we'll come back with a clear price.
Request a quote