Hampshire · South East
Dry Rot Treatment in Romsey
Landlords and agents throughout Hampshire, including Romsey, rely on us for documented dry rot treatment.
Where we work around Romsey
Romsey is in the Hampshire council area in the South East. That includes the SO51 postcode districts. We also take jobs in Chandler's Ford, North Baddesley, Rownhams and Nursling.
Dry Rot Treatment in Romsey: local know-how
Barn conversions outside Romsey may have historic timbers that need careful, conservation-led treatment. Rural homes around Romsey left empty for long periods are more prone to leaks and dry rot.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Victorian homes in Romsey often have timber bonding and lintels built into brick walls, where dry rot can travel.
What we can do in Romsey
Fungicidal Treatment of Timber and Masonry
Targeted boron-based or other approved fungicides applied to remaining timber and masonry near the outbreak to stop regrowth while walls dry.
Opening Up and Removal of Decayed Timber
Floorboards, skirtings and plaster removed to expose the outbreak, with decayed timber cut out and bagged for safe disposal.
Moisture Source Repairs and Drying
Leaks, blocked ventilation and bridged damp barriers fixed so the building dries out and the fungus cannot keep growing.
Dry Rot Survey and Identification
A specialist inspection to confirm dry rot, distinguish it from wet rot, trace the moisture source and map the full extent of the outbreak.
Replastering and Reinstatement
Walls replastered, floors relaid and joinery refitted once the structure is dry and sound, with breathable finishes in older homes.
Structural Timber Replacement
Joists, wall plates, lintels and floorboards replaced with pre-treated timber, isolated from damp masonry and fixed to suit the structure.
Typical costs in Romsey
- Replastering after treatment: £60–£130 per m². Lime or modern plaster once walls have dried, depending on the system used.
- Joist end replacement: from £150 per joist. Cutting out decayed ends, splicing or replacing with treated timber and isolating from masonry.
- Multi-room or structural outbreak: £7,000–£20,000+. Extensive decay affecting several rooms, lintels or roof timbers, often with an engineer involved.
Prices are a guide. Your quote for Romsey is a fixed price based on the details you give us. Full price guide.
Dry Rot Treatment questions from Romsey
How quickly can a specialist visit my Romsey property?
Specialists can usually inspect properties in Romsey within a few days to a week. If you have found active fungus or structural damage, mention it on the quote form so the visit can be prioritised.
Can you treat dry rot in a listed building in Romsey?
Yes, though you may first need listed building consent from Hampshire. Specialists use conservation-led methods that remove only what is necessary and focus on drying the building to protect historic fabric.
Is dry rot common in Romsey?
Dry rot can occur in any Romsey property with long-term damp, especially older homes with timber built into walls and poorly ventilated floors. Leaks, blocked air bricks and gutter problems are common causes.
Can you help buyers in Romsey with dry rot reports?
Yes. If your survey on a Romsey property mentions dry rot, a specialist can confirm it and provide a report and fixed price. This helps you negotiate with the seller or lender before completing.
Does dry rot come back after treatment?
Dry rot should not come back if the moisture source is fixed and the building stays dry. Regrowth usually happens when leaks return, ventilation is blocked again or the original cause was not found. Keep gutters, plumbing and air bricks in good order after treatment.
What is dry rot?
Dry rot is decay caused by the fungus Serpula lacrymans, which attacks damp timber in buildings. It can spread strands across masonry to reach new wood, causing timber to shrink, crack into cubes and crumble. Despite its name, it needs moisture to grow, usually timber above about 20% moisture content.
Helpful guides
How to Identify Dry Rot: Signs, Simple Tests and What to Do
Dry rot shows as brown, crumbly timber with deep cube-shaped cracking, white cotton-wool or grey sheet-like growth, thick grey strands that…
Read the guide →Dry Rot vs Wet Rot: Differences, Signs and Treatment
Dry rot, caused by Serpula lacrymans, can spread beyond the original wet area and across masonry to reach new timber, so it needs wider…
Read the guide →Get a free dry rot treatment quote in Romsey
Tell us what you need and we'll come back with a clear price.
Request a quote